Shop Your Motorcycle:
SoloMotoParts.com > > > > Arrow Racing Collector for XT1200Z Super Tenere 10-16
Share Your Own Image

Arrow Racing Collector for XT1200Z Super Tenere 10-16

(8)
Price:
$341.60
On Sale, Buy Today and Save $6.97!
List: $348.57
Availability: May need 3-4 weeks (special order) to ship
what does this mean?
Promotions:
No Restock Fees, 30 Days to Return. more
Free Shipping in the US48. more
Quantity:



    Product Information

    Arrow Racing Collector for XT1200Z Super Tenere 10-16



    Racing Collectors / Headers:

    Headers material: stainless steel
    Junction (outlet) diameter (mm): 45
    Oxygen sensor plug: NO
    CO sensor plug: Yes
    dbKiller: NO
    Weight (Kg): 2.44


    They seem to be only pipes: but the real thing is different. Made in AISI 304 stainless steel and, for Competition systems, in titanium alloy, Header pipes kits you can buy from an Arrow dealer come from an hard development, done by Arrow R&D guys, using all the experience made up in years of work done in worldwide race-tracks.

    To this extremely important ingredient, you have to add the craftsmanship of Arrow R&D people: pipes diameters, sections changes, components, welding and layout are carefully tested to design a product with high performances, reliable, long-lasting and, last but not least, good looking. Depending on the engine and on the ignition scheme, the best layout is choosen for the header pipes, the manifold and the mid-pipe, up to the silencer(s). So we speak of 4:2:1, 4:2:2, 2:1:2, 4:2:1:2, 3:1:1 and so on: all this stuff may seem too close to a football team playing tactics, instead the right choice for the header scheme is a key factor to have a good designed full system.

    Theory is not enough, we need also a superior attention in the production process: it's extremely important to keep the sections changes as smooth as possible, to have a gas flow that is the most regular as possible. To meet this goal, junctions between the various parts of the full exhausts are made with CNC machined components. For the same reasons, weldings have to be almost perfect and cannot reduce the gas flow sections.

    type: DP01 var.I ver.i/ii/iii - i

    • Product ID: 54385
    • Manufacturer: Arrow
    • Manufacturer Part#: 72095PD
    • Fits
      • Yamaha XT 1200Z Super Tenere 2010
      • Yamaha XT 1200Z Super Tenere 2011
      • Yamaha XT 1200Z Super Tenere 2012
      • Yamaha XT 1200Z Super Tenere 2013
      • Yamaha XT 1200Z Super Tenere 2014
      • Yamaha XT 1200Z Super Tenere 2015
      • Yamaha XT 1200Z Super Tenere 2016
    • Condition: New, unless otherwise noted.
    • SoloMotoParts.com is an authorized Arrow dealer

    Customer Reviews About This Item

    See all 8
      Arrow Header for N1000sx
      by Derek T. on 07/12/13
      Pros: Great fit, straight forward. Fitted right up to my TBR Black series Slip-on.
      Arrow for 2013 NC700X 6 speed
      by Michael S. on 05/12/17
      Pros: Very easy install. Direct bolt on with NO mods whatsoever. I didn't dyno afterwards but the 2k to 3k range is much improved. I ran a mostly stock bike from CT to Vermont and back and got about 83 MPG. Same near stock bike going from CT to Maine and back again while running at about 85-90 MPH on open highway;i got about 72 MPG. Since I use this this bike as a local commuter to work and back (about 10.5 mile one way with a good size hill to climb each way) I have noticed that my bike will pull harder at lower RPM's. Before I had only an aftermarket silencer, now I added the Arrow header and K&N air filter at the same time. I did a factory reset on the ECM and just ran with it. The bike now pulls at almost a full 1000 rpms lower than it before, and has an awesome exhaust tone. I honestly find myself shifting gears faster at lower RPM's aiming to run at 6th gear where my bike would just buck and shake before. I cannot believe the torque the motor has to pull hills at 2500 rpms, my bike would have just shuddered and stumbled before. I am looking to make another Vermont run as a side by side comparison; I am aiming for better than 90 MPG.
      Cons: The wait time. I was expecting this item to be shipped within two weeks of ordering. It took well over a month before it was shipped from Italy. Then from the ports in California to my house in New England to another week. Now to be fair I was in contact by email and phone with SOLOMOTO the whole time I was wondering where my part was. The said they sent an email to say the shipping was delayed. I dont ever remember getting such an email;maybe it went to spam and I deleted it. But when I called they returned the call that day. And when I emailed they stayed right on top of it, so I cannot fault Solomoto at all. I just sucks that it takes so long to get an item from overseas. But damn am I glad I waited, It makes a world of difference. If you want it right now, order from Ebay, and pay for it. If you want a good quality product and are in NO rush order this pipe.
      Great Collectors!
      by Steve S. on 03/26/16
      Pros: These arrow collectors work great on my 2011 Kawasaki Ninja 1000! Paired with some M4 cans, it sounds amazing...like a proper street bike!! Also not to mention how much weight you save by removing the stock exhaust system, I HIGHLY recommend buying these! I'm also going to go get my bike dyno tuned and hopefully gain 10+ horsepower from the upgrades! This product takes 3-4 weeks to arrive at your doorstep so make sure you take that into account.
      Cons: NONE! The install was pretty straight-forward and I didn't even have to remove any of my fenders because it comes in sections and you piece it all together.

    What Did Other Customers Buy With This Item?

    See all
    See Less

    We Think You Might Like These

    See all
    See Less

    Read Customer Reviews

    Do you own this product?