Shop Your Motorcycle:

SoloMotoParts.com > > > > Scotts Steering Stabilizer Bolt-On Kit for WR250X 09-11
Shown with optional large knob
Boltl on kit installed with renthal bowed handlebars and stock triple clamp. Does not include handlebars.
Bolt-On Kit
Bolt on kit installed with oversized handlebars and stock triple clamp. Does not include handlebars.
Share Your Own Image

Scotts Steering Stabilizer Bolt-On Kit for WR250X 09-11

(4)
Price:
$215.00
Found a lower price?
Option:
Handlebar Size:
Triple Clamp:
Availability: Select an option from the menu above.
Promotions:
No Restock Fees, 30 Days to Return. more
Free Shipping in the US48. more
Quantity:



    Product Information

    Scotts Steering Stabilizer Bolt-On Kit for WR250X 09-11

    Picture is only a representation. Actual bike not shown. Does not include handlebars.

    The crossbar on the stock handlebars is too low and will not clear the stabilizer on the 08-09 WR250R/X. You will need to order handlebars with (1) a higher cross bar with 37mm clearance, (2) a bowed crossbar or (3) convert to an oversized handlebar kit. This kit includes the special +8mm linkarm as part of the price.

    Scotts Stabilizer/Damper
    • Only Stabilizer with three fully adjustable circuits.
    • Only Stabilizer that has an adjustable damping control that allows 25 adjustment clicks while riding.
    • Only Stabilizer that allows you to adjust the amount of degrees of damping you want from centerline.
    • Only Stabilizer that has a "High Speed Circuit" designed to absorb those sharp edged jolts.
    • Only Stabilizer that successfully works for every type of off-road application... including Motocross.
    • Only Stabilizer that easily moves from motorcycle to motorcycle in literally seconds.
    • Only stabilizer that's been around for 15 years and has won every major off-road race including the grueling Baja 1000, 15 times.
    • Only stabilizer to be tested and endorsed by every leading off-road magazine

    Bolt-On Kit
    The bolt-on kit literally bolts on and usually mounts around the head tube. Installation time varies from bike to bike but normally takes about 45 minutes depending on your skills and the model of motorcycle. This kit is specific to each bike with consideration for which combination of bars and triple clamps are being used. We have meticulously designed these kits to make your installation time fast and easy. This kit typically will include a Stabilizer, link arm, handlebar clamp, frame backet, step by step pictured instructions, owners manual and applicable hardware. Some models may require replacement handlebars.
    • Product ID: 43432
    • Manufacturer: Scotts
    • Fits
      • Yamaha WR250X 2009
      • Yamaha WR250X 2010
      • Yamaha WR250X 2011
    • Condition: New, unless otherwise noted.
    • SoloMotoParts.com is an authorized Scotts dealer

    Customer Reviews About This Item

    See all 4
      Great job SOLOMOTO!
      by Shota H. on 05/15/16
      Pros: Really happy with purchase, SoloMoto teams was very helpful.
      I had Pro-Taper bar, bar riser and aftermarket tank and was not sure if this would fit right in. With a little help of team member I bought it with confident and they even arranged manufacturer to provide with longer pin to fit my bike setup. Would highly recommend.
      Cons: None
      best modification you can make
      Gary H. on 05/29/2010
      Pros: This is the best mod you can make to any dirt bike. Scotts proven Quality. Works great in tight woods or open desert. Excellent!!
      Fredrik J. on 07/18/2010
      Pros: I have recomended this seller to all of my friends in Sweden.
      Thanks for a very, very, good service

    We Think You Might Like These

    See all
    See Less

    Read Customer Reviews

    Do you own this product?
    Product Variant Product ID Manufacturer Part Number Availability Add to Shopping Cart
    Option: Bolt-On Mount Kit Only (No Stabilizer) 43432 May require additional 2-3 business days to process  What does this mean?
    Option: Bolt-On Stabilizer Kit Complete 43432 May require additional 2-3 business days to process  What does this mean?