SoloMotoParts.com > > > > SBS Racing Dual Carbon Front Brake Pads for S1000RR 10-11 (Closeout)
SBS Racing Dual Carbon Front Brake Pads for S1000RR 10-11 (Closeout)
Share Your Own Image

SBS Racing Dual Carbon Front Brake Pads for S1000RR 10-11 (Closeout)

Price:
$31.87
On Sale, Buy Today and Save $45.08!
List: $76.95
Found a lower price?
Availability: Available, only 2 left
Ships Wed, Aug 06 if ordered within 10hr 10min
Tech Notes: Brake pads are sold per caliper.
Promotions:
Free 60 Day Return Policy w/ No Restock Fees. learn more
Quantity:
    Product ID: #37658



    Share: Facebook Twitter and more

    Product Information

    SBS Racing Dual Carbon Front Brake Pads for S1000RR 10-11 (Closeout)

    Picture is only a representation. Actual pads may vary.

    Quantity of 2 is needed for bikes with dual front rotors!

    The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.
    World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

    Characteristics:
    • Thermal bedding-in and brake fade eliminated by use of DEST technology.
    • High initial bite
    • High friction level and progressive brake feel
    • High thermal stability
    • Consistent brake performance and brake lever position
    • Low pad wear
    • Rotor friendly due to transfer film generated on disc surface
    • Available for the majority of new Superstock, Supersport and racing brake calipers
    • Recommended for top level international and national championship road racing
    • For race use only

    Bedding-in procedure for SBS-DC

    When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
    1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
    2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
    3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
    4. Then a period to allow discs to cool again before proper use.
    5. Then a few easy laps building up heat - ready for race use.


    When bedding-in procedure IS needed         

    Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.


    When bedding-in procedure is NOT needed

    When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)


    Cleaning of brake discs - NOT when using SBS-DC

    When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session.
    • Product ID: 37658
    • Manufacturer:
      SBS (learn more)
    • Manufacturer Part#: 870DC-PU
    • Sold As: ST
    • Fits (click your bike to view all items for it):
      • BMW S1000RR 2010
      • BMW S1000RR 2011
    • Note: This is a part designed for race or high performance usage and may not be a direct bolt-on or suitable for street use.
    • Condition: New, unless otherwise noted.
    • SoloMotoParts.com is an authorized SBS dealer

    Learn more about SBS

    Shop SBS Products

    What Did Other Customers Buy With This Item?

    See all
    See Less

    Read Customer Reviews

    Do you own this product?
    There have been no reviews for this product.
    Barnett Performance Kevlar Friction Plates for S1000RR 10-12 Akrapovic Evolution Titanium Full Exhaust for YZ450F 10-11 (Closeout) Ram Mount Motorcycle Fork Stem Base w/ 1" Ball for YZF-R6 03-13
    $119.64
    $383.87
    $16.16