SoloMotoParts.com > > > > SBS Racing Dual Carbon Front Brake Pads for Daytona 675 09-10 (Closeout)
SBS Racing Dual Carbon Front Brake Pads for Daytona 675 09-10 (Closeout)
Share Your Own Image

SBS Racing Dual Carbon Front Brake Pads for Daytona 675 09-10 (Closeout)

Price:
$20.35
On Sale, Buy Today and Save $27.60!
List: $47.95
Found a lower price?
Availability: In Stock, only 2 left
Ships Wed, Sep 03 if ordered within 19hr 59min
Tech Notes: Brake pads are sold per caliper.
Promotions:
Free 60 Day Return Policy w/ No Restock Fees. learn more
Quantity:




    Product Information

    SBS Racing Dual Carbon Front Brake Pads for Daytona 675 09-10 (Closeout)

    Quantity of 2 is needed for bikes with dual front rotors!

    The SBS DC Dual Carbon road racing compound has since the introduction in 2001 proven to be the ”Choice of Champions”.
    World top racing teams have achieved a long row of race wins, lap records, national and World Championship titles in Superstock, Supersport, Superbike and Endurance racing using SBS Dual Carbon pads.

    Characteristics:
    • Thermal bedding-in and brake fade eliminated by use of DEST technology.
    • High initial bite
    • High friction level and progressive brake feel
    • High thermal stability
    • Consistent brake performance and brake lever position
    • Low pad wear
    • Rotor friendly due to transfer film generated on disc surface
    • Available for the majority of new Superstock, Supersport and racing brake calipers
    • Recommended for top level international and national championship road racing
    • For race use only

    Bedding-in procedure for SBS-DC

    When changing for SBS-DC from using another type of brake pad material - Follow this Bedding-in procedure very carefully:
    1. Remove existing friction material deposit from brake discs - using eg. emery paper #150.
    2. Do a series of gentle brakings until pad-surface is in full contact with disc-surface.
    3. After pad/disc contact is achieved - repeated short brakings building up heat in discs and pads until a very thin and uniform dull/black/darkblue layer of friction material (transfer film) is established on the brake disc.
    4. Then a period to allow discs to cool again before proper use.
    5. Then a few easy laps building up heat - ready for race use.


    When bedding-in procedure IS needed         

    Always follow the above bedding-in procedure - when changing for SBS-DC for the first time OR when using new brake discs.


    When bedding-in procedure is NOT needed

    When brake discs are covered by SBS-DC friction material (transferfilm) - new pads only need about one/two laps to be in full contact with disc-surface - then the pads are race ready (Thermal bedding-in as described above in point 1. - 4. is not needed)


    Cleaning of brake discs - NOT when using SBS-DC

    When brake discs are covered by SBS-DC friction material (transferfilm) - Do not clean/sand/grind the brake discs after each session.
    • Product ID: 41602
    • Manufacturer:
      SBS (learn more)
    • Manufacturer Part#: 864DC-PU
    • Sold As: ST
    • Fits (click your bike to view all items for it):
      • Triumph Daytona 675 2009
      • Triumph Daytona 675 2010
    • Note: This is a part designed for race or high performance usage and may not be a direct bolt-on or suitable for street use.
    • Condition: New, unless otherwise noted.
    • SoloMotoParts.com is an authorized SBS dealer

    Read Customer Reviews

    Do you own this product?
    There have been no reviews for this product.