Shop Your Motorcycle:

SoloMotoParts.com > > > > HealTech Gear Indicator GI Pro X-Type for 690 Enduro/SMC 08-13
Share Your Own Image

HealTech Gear Indicator GI Pro X-Type for 690 Enduro/SMC 08-13

(6)
Price:
$119.99
Found a lower price?
Color:
Availability: Select an option from the menu above.
Promotions:
No Restock Fees, 30 Days to Return. more
Free Shipping in the US48. more
Quantity:



    Product Information

    HealTech Gear Indicator GI Pro X-Type for 690 Enduro/SMC 08-13

    GIpro-X from HealTech Electronics Ltd., the third GIpro variant, fits ALL motorcycles and the vehicles which have electronic speedometer (either analog or digital readout). With the help of a modern processor and a sophisticated firmware, the GIpro-X is able to offer faster and more reliable readings than its competitors. It is very easy to mount it on the instrument cluster owing to its small size and compactness. It’s clear front face goes well with the factory instruments.

    The product has a Red display.

    The unit is auto learning with no programming wires or buttons. Just go through the gears and you are done (see user guide). Others features include Programmable Shift Light function and High Speed Warning which aren’t present in the other products. The product is rugged, 100% weatherproof and comes with 2-years replacement warranty.

    Installation? Pretty dang simple!!!

    HealTech makes bike specific looms to make the installation quick and simple. This kit is "semi-universal" which means that it requires one wire to be spliced (rpm signal) but the speedo sensor wire is plug-and-play! Follow these steps:

    Step 1: Locate the speed sensor. Plug the GIPRO-X speed pickup wire inline. If you have a SpeedoHealer installed, you have to connect the plugs in-line in the following order: Speed sensor male plug >> GIpro >> SH >> bike female plug.

    Step 2: Locate the ECU (Engine Control Unit) box. It is usually under the seat or a side fairing. Find the tach signal wire (varies with the bike model, so check bike-specific installation instructions for wire color directions).

    Step 3: Just go through the gears (see user guide for instructions) and you are done. Note that HealTech suggests doing this with a WARMED UP engine.

    • Product ID: 48326
    • Manufacturer: HealTech
    • Fits
      • KTM 690 Enduro 2008
      • KTM 690 Enduro 2009
      • KTM 690 Enduro 2010
      • KTM 690 Enduro 2011
      • KTM 690 Enduro 2012
      • KTM 690 Enduro 2013
      • KTM 690 SMC 2008
      • KTM 690 SMC 2009
      • KTM 690 SMC 2010
      • KTM 690 SMC 2011
      • KTM 690 SMC 2012
      • KTM 690 SMC 2013
    • Condition: New, unless otherwise noted.
    • SoloMotoParts.com is an authorized HealTech dealer

    Customer Reviews About This Item

    See all 6
      Great addition.
      robert k. on 09/06/2010
      Pros: Looks good installed, numbers are good size and I chose the yellow to match the display panel.
      Cons: This is not an easy install. Right side mid fairing must come off and speed sensor connector found buried behind aft side of engine then tach signal wire must be located either at the ecm which is under the tail cowl or go forward and remove windshield, then panel underthe windshield and find tach wire at tach connector. Total time about 6hrs depending on where you mount the unit.
      Excellent product.
      by Roger W. on 09/26/12
      Pros: On my bike (KTM 690 SMC), the installation was extremely easy. Everything needed was located behind the head lamp. Programming the indicator was also very easy. A numpty like myself programmed it with no problems. I had 2nd gear programmed before getting to the end of the driveway. It is great to indicate a missed shift. A couple of times, I had shifted up, and it seemed to be in the same gear, and the indicator verified this. All in all it is an excellent product, and installation on an SMC is super simple. Finding the wiring diagrams for my bike proved to be much more difficult than the installation itself. Now, there is no more guessing if I have one more gear to go when droning down the freeway.
      Cons: It calculates what gear you are in, so if coasting towards a stop light with the clutch pulled in, there are times when the speed and RPM's match the right ratio and the indicator indicatates a gear. Not a problem. Just interesting.
      E-Z Install
      by Glenn H. on 01/07/14
      Pros: Plug & Play install. Everything you need is included, good instructions. With basic electrical / maintenance skills you should be able to do it in a couple of hours, faster if you already have a little experience working on bikes. Programming is a breeze & finished project looks cool. Really nice knowing what gear I'm in with a glance.
      Cons: Not a con just a "heads up" -On my '09 Yamaha Fz-6: tap into light gray wire on tach sensor. Tap into Brown wire from rear brake switch for constant 12 volts to power LED.

    We Think You Might Like These

    See all
    See Less

    Read Customer Reviews

    Do you own this product?
    Product Variant Product ID Manufacturer Part Number Availability Add to Shopping Cart
    Color: Red 48326 GPX-U01-RD May require additional 3-4 business days to process  What does this mean?
    Color: Blue 48326 GPX-U01-BL May require additional 3-4 business days to process  What does this mean?
    Color: Yellow 48326 GPX-U01-YL May require additional 3-4 business days to process  What does this mean?
    Color: Green 48326 GPX-U01-GN May require additional 3-4 business days to process  What does this mean?
    Color: White 48326 GPX-U01-WH May require additional 3-4 business days to process  What does this mean?